Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590

In this paper, microhardness and microstructural characteristics of dual phase DP590 steel resistance spot weld joint under two different welding conditions (i. e. single pulse and multi pulse) were studied. It was observed that applying multi pulse currents resulted in quasi-equiaxed grains of tempered martensite in fusion zone (FZ) of the weldment. The refinement of microstructure in fusion zone using multi pulse current treatment resulted in reduced hardness of the weld joint.     

双馈风机经VSC-HVDC接入弱受端系统运行特性分析

基于电压源换流器的高压直流输电(VSC-HVDC)是远距离风电并网的理想方案,同时可用于联接弱受端系统,但双馈风机经VSC-HVDC能够馈入多弱的受端系统仍待深入研究,有必要提出基于短路比的指标来衡量所能接入的受端系统。对此,基于定功率控制下VSC的稳定运行约束,分析系统稳态的临界运行点,总结出临界短路比的求解步骤。在此基础上,结合双馈风机的控制方程,详细讨论了风电场出力、弱交流系统等效阻抗和临界短路比的关系。仿真分析发现,受双馈风机无功特性的影响,接入受端系统的临界短路比未能达到理论值,引入基于无功补偿的有效短路比作为受端系统的强弱判断指标,使得所提临界短路比求解方法在此工况下依然成立。     

脉冲电流对6016-T4铝合金板材力学性能的影响

为研究在电流辅助成形时脉冲电流的电流密度、占空比和脉冲频率3个因素对6016-T4铝合金板材力学性能的影响规律,设计了3因素5水平的正交实验。实验表明,对6016-T4铝合金力学性能影响的主次因素是:电流密度>占空比>脉冲频率。在此基础上,选用主次2个因素,即电流密度和脉冲频率,使用控制变量法进行进一步的实验研究。实验结果表明,电流密度对6016-T4铝合金力学性能影响较大,改变电流密度的同时带来了明显的焦耳热效应,该效应对材料有明显的软化作用,降低了材料的流动应力,但是,同时也降低了铝合金板的伸长率,这是因为过大的电流密度加剧了试样的主应变演化,进而促进了试样的断裂。而脉冲频率的变化对6016-T4铝合金板材的力学性能影响很小,这也印证了正交实验的结论。     

环氧丙烷产业现状及发展趋势

简述了全球及我国环氧丙烷产业的生产及供需现状;对环氧丙烷在聚醚多元醇、丙二醇/碳酸二甲酯、丙二醇醚及其酯类等领域的应用进行了分析;并对环氧丙烷生产技术进行了比较,提出了发展建议。     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

Analysis of a magnetic field and Hall effects in nanoliquid flow under insertion of dust particles

In this study, the two‐phase hydromagnetic flow of a viscous liquid through a suspension of dust and nanoparticles is considered. The influence of the Hall current is also taken into account. The similarity variables are utilized to transform the problem into one independent variable. The obtained expressions in one independent variable are solved through the Runge–Kutta–Fehlberg scheme connected with the shooting procedure. The computed results are sketched for employing multiple values of physical constraints on the temperature and velocity of the nanofluid and dust phase. The characterization of various nanoparticles like Cu, Al₂O₃, TiO_2, and Ag on velocities and temperatures of both phases is made through plots. A comparative analysis in the limiting approach is presented to justify the present solution methodology. The range of emerging parameters is taken as 0 ≤ l ≤ 3, 0.1 ≤ β_t ≤ 3, 0 ≤ m ≤ 2.5, 0 ≤ M² ≤ 2, 0.1 ≤ β_v ≤ 3, 0 ≤ ? ≤ 0.4, and ?0.8 ≤ λ ≤ 0.8. From the study, it is revealed that β_t has the opposite effect on the temperature of dust and nanofluid phases. The Hall parameter m raises the profiles of velocities in the nanoliquid and dust phases. Also, it is found that the transverse velocities h(η) and H((η) and temperatures θ(η) and θ_p(η) rise for larger ?.     

Steady MHD Casson Ohmic heating and viscous dissipative fluid flow past an infinite vertical porous plate in the presence of Soret,Hall, and ion‐slip current

In the present study, the influence of Hall and ion‐slip current on steady magnetohydrodynamics mixed convective, Ohmic heating, and viscous dissipative Casson fluid flow over an infinite vertical porous plate in the presence of Soret effect and chemical reaction are investigated. The modeling equations are transformed into dimensionless equations and then solved analytically through the multiple regular perturbation law. Computations are performed graphically to analyze the behavior of fluid velocity, temperature, concentration, skin friction, Nusselt number, and Sherwood number on the vertical plate with the difference of emerging physical parameters. This study reflects that the incremental values of Casson fluid parameter and Schmidt number lead to reduction in velocity. However, fluid velocity rises due to enhancement of ion‐slip parameter but an opposite effect is observed in case of Hall parameter. In addition, the Sherwood number declines with enhancing dissimilar estimators of the chemical reaction, Schmidt number, as well as Soret number.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

光纤电流互感器自适应温度补偿系统

针对光纤光栅(FBG)电流互感器容易受到温度影响这一特性，设计了一种基于STM32单片机的光纤光栅电流互感器温度补偿系统。通过单片机实现PID自适应控制算法，锁定电流互感器输出的电压值恒定在静态工作点，从而实现电流互感器不受外界温度影响得到稳定的电流信号输出。实验结果表明，在22~39 ℃范围内，输出电压稳定度在±1%以内，解决了电流互感器受限于环境温度的问题，实现了电流与温度的同时测量。经过此方法改进后的电流互感器测量精度高、系统结构简单、成本低、可靠性高，加快了光纤光栅电流互感器的实用化进程。     

MOCVD-derived GdYBCO tapes with smooth surface and low Rs based on a new self-heating technology

The metal organic chemical vapor deposition (MOCVD) method was used to prepare GdYBCO films on LaMnO₃/ homo epitaxial-MgO/ ion-beam-assisted-deposition-MgO/ solution-deposition-planarization-Y₂O₃ buffered Hastelloy tapes. By adopting a simple self-heating technique, the substrates were heated by the joule effect after applying a heating current (I_h) through Hastelloy metal tapes. The effects of substrate temperature and (Gd, Y)/Ba ratio (r_c) in the precursor on the biaxial texture, surface morphology and superconducting performance of GdYBCO films were systematically investigated by varying the values of I_h and r_c. Needle-like outgrowths formed on the substrate surface were characterized using a scanning electron microscope, energy dispersive spectrometer and X-ray diffraction system. The results show that a high I_h or r_c leads to the formation of needle-like outgrowths. Therefore, I_h and r_c are crucial process parameters that control the growth of needle-like outgrowths on the surface of GdYBCO films. Three hundred nanometer thick GdYBCO films were prepared at different I_h and r_c by the MOCVD process. At an I_h of 27.0?A and an r_c of 0.6, the surface of the GdYBCO film was very smooth and dense, which can provide a good template for multiple depositions of GdYBCO films. The critical current density of the deposited 300?nm-thick GdYBCO film was 4.4 MA/cm² (77?K, 0?T), which is attributed to good biaxial texture and appropriate film composition. Furthermore, the microwave surface resistance (77?K, 10?GHz) of the GdYBCO film was merely 0.581?mΩ.